Rosemount 400/13 Endurance Conductivity Sensor – NDMARINETECH

The endurance Rosemount 400/13 sensor is a contacting conductivity sensor that can measure electrolytic conductivity accurately in clean, non-corrosive liquids with conductivity levels below 20,000 µS/cm.

400/13 Sensor Specifications:

• Model Number: 400-13 (sometimes called 0400-13)
• Sensor Type: Contacting conductivity sensor with titanium electrodes and a polyether ether ketone (PEEK) insulator
• Material for the electrode: titanium
• Sealing: O-ring made of Viton®
• Cell Constant: 1.0/cm is the standard (alternative constants include 0.01/cm and 0.1/cm)
• Standard working temperature is up to 221°F (105°C), however there is also a high-temperature version that can go up to 392°F (200°C)
• Maximum pressure: 250 psig (1825 kPa)
• Temperature Compensation: Comes with a standard Pt-1000 RTD sensor, but different alternatives are available
• Connection: ¾-inch male National Pipe Thread (MNPT) screw-in fitting for direct insertion; choices for built-in cable or Variopol rapid disconnect fitting
• Installation: Can be put into pipes, tanks, or side-stream flow cells; works with vacuums up to 1.6 inHg
• Features: Factory-calibrated for accuracy right out of the box, a strong two-electrode construction for dependability, and resistant to corrosion and fouling
• Weight: About 470 grams

Certifications and Options: You can choose to get calibration and compliance certificates, an integral junction box, or a longer insertion length.