Kongsberg MRU 2 Motion Reference Unit
Condition: Used
- 100% SECURED PAYMENTS
- AVAILABLE IN STOCK - READY TO SHIP
- EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
- HASSLE FREE 14-DAY RETURNS
Kongsberg MRU 2 Motion Reference Unit
The Kongsberg MRU 2 (manufactured by Kongsberg Seatex AS) is a solid-state Motion Reference Unit engineered specifically for demanding marine, offshore, and hydrographic operations. Designed to output real-time heave, roll, pitch, and linear acceleration data, the MRU 2 eliminates moving mechanical parts by utilizing an array of three high-precision linear accelerometers paired with three solid-state angular rate gyros.
The MRU 2 delivers deterministic motion compensation for dynamic positioning (DP) systems, helideck monitoring systems (HMS), single-beam echo sounders, and active heave compensation (AHC) cranes. Unlike entry-level inclinometers, the MRU 2 maintains phase-accurate heave measurements across swell periods up to 25 seconds, ensuring uncompromised data integrity in rough sea states.
Model Details
- Primary Model: Kongsberg Seatex MRU 2
- Standard MPNs: 103976 / MRU-2 / 308852 (Standard Subsea/Surface IP66 Housing)
- Firmware Series: MRU-2-SW-V3.x / V4.x (Configurable via MRC+ / MRU Configuration Software)
- Connector Interface: Standard 12-pin Souriau / Amphenol watertight marine circular connector (Pigtail cable lengths: 5 m, 10 m, or 25 m standard)
- Part Number Cross-References:
- Kongsberg Seatex Legacy P/N: 103976-01
- Replaces / Interoperable with: MRU-D (for basic roll/pitch/heave telemetry), MRU-Z (legacy coastal series)
- Upgrade Path: Kongsberg MRU 3 / Kongsberg MRU 5 (for high-precision multibeam bathymetry)
Kongsberg MRU 2 Technical Specifications
| Parameter | Technical Rating and Specification |
|---|---|
| Model and MPN | Kongsberg Seatex MRU 2 MPN 103976 or 308852 |
| Roll and Pitch Range | Plus or minus 45 degrees Dynamic and Static |
| Roll and Pitch Accuracy | 0.05 degrees RMS Static and 0.08 degrees RMS Dynamic |
| Angular Resolution | 0.001 degrees |
| Heave Range | Plus or minus 50 m |
| Heave Accuracy Real Time | 5 cm or 5 percent whichever is greater for periods under 20 s |
| Heave Period Bandpass | 1 s to 25 s User Configurable |
| Linear Acceleration Range | Plus or minus 30 m per s squared 3 Axis Solid State |
| Angular Rate Range | Plus or minus 75 degrees per s 3 Axis Solid State |
| Output Update Rate | Up to 100 Hz Selectable 1, 2, 5, 10, 20, 50, 100 Hz |
| Digital Serial Ports | 2 Independent RS422 or RS232 Channels 1200 to 115200 bps |
| Supported Protocols | NMEA 0183 PSXN PRDID PASHR, TSS1, Kongsberg Binary, Simrad EM |
| Analog Outputs | 4 Configurable Channels plus or minus 10 V DC or 4 to 20 mA |
| Power Supply Input | 10 V to 36 V DC Nominal 24 V DC Galvanically Isolated |
| Power Consumption | 8 W Nominal and 12 W Maximum |
| Operating Temperature | Minus 5 C to plus 55 C Storage Minus 25 C to plus 70 C |
| Ingress Protection | IP66 Surface Anodized Aluminum or IP68 3000 m Titanium Subsea Option |
| Dimensions and Weight | 204 mm Height x 105 mm Diameter and 2.4 kg in air |
| Certifications | DNV Type Approval, IEC 60945, CAP 437 Compatible |
Compatibility
- Dynamic Positioning (DP) Systems: Kongsberg K-Pos DP-11, DP-21, DP-22; Converteam / GE Marine ADP series; Navis NavDP 4000.
- Hydrographic Echo Sounders: Kongsberg EA 400, EA 600 single-beam echo sounders; Teledyne Odom Echotrac CV100/CV200; Knudsen 320B/P.
- Offshore Crane & Winch Controllers: MacGregor, National Oilwell Varco (NOV), and Liebherr Active Heave Compensation (AHC) PLC interfaces.
- Helideck Monitoring Systems (HMS): Kongsberg HMS 100 / HMS 200 (CAP 437 compliant installations).
- Radar & Satcom Stabilization: Furuno, JRC, and Kelvin Hughes X/S-band radar stabilization loops; Sea Tel and Orbit marine VSAT antenna pedestals.
Applications
- Dynamic Positioning (DP1 / DP2) vessel reference redundancy
- Single-beam hydrographic bathymetry and coastal dredging surveys
- Offshore crane Active Heave Compensation (AHC) and subsea payload deployment
- Helideck Motion Monitoring (CAP 437) on FPSOs, drillships, and PSVs
- Marine VSAT and stabilized radar platform pitch/roll correction
- Wave height and vessel motion structural fatigue monitoring
Features
- Zero Moving Parts Solid State Architecture: Eliminates mechanical gimbal wear, friction drift, and periodic bearing replacements, ensuring continuous operation across 50000 plus hours MTBF.
- Dual Protocol Simultaneous Telemetry: Outputs high speed binary telegrams at 100 Hz for dynamic control loops while simultaneously transmitting NMEA 0183 PSXN PRDID or TSS1 strings to bridge navigation systems.
- Configurable Analog and Digital IO: Includes 4 isolated analog channels plus or minus 10 V or 4 to 20 mA allowing direct integration with legacy PLC crane controllers without external digital to analog converters.
- Wide Range DC Power Isolation: Accepts unregulated 10 to 36 V DC vessel battery supplies with integrated galvanic isolation and surge suppression compliant with IEC 60945.
- Real Time Lever Arm Compensation: Internal firmware calculates motion directly at up to three remote points of interest such as transducer head, crane tip, or helideck center using user input X, Y, Z offset coordinates.
Frequently Asked Questions
What is the difference between the Kongsberg MRU 2 and MRU 5?
The Kongsberg MRU 2 is engineered for general marine motion monitoring, single beam echo sounders, dynamic positioning, and crane heave compensation, offering 0.05 degrees roll and pitch accuracy and 5 cm real time heave accuracy. The Kongsberg MRU 5 incorporates higher grade inertial sensors with 0.02 degrees roll and pitch accuracy and 2 cm heave accuracy, making the MRU 5 mandatory for high resolution multibeam bathymetric surveys.
Can the Kongsberg MRU 2 output both NMEA and TSS1 protocols simultaneously?
Yes. The MRU 2 is equipped with two independent serial ports Port 1 and Port 2. You can configure Port 1 to transmit standard NMEA 0183 strings PSXN or PRDID at 9600 bps for bridge displays while Port 2 outputs high speed TSS1 or MRU Binary telegrams at 38400 bps for a hydrographic acquisition PC or DP controller.
Does the MRU 2 require an external velocity or GPS aiding input?
For standard roll, pitch, and heave measurements, the MRU 2 operates as a completely autonomous standalone inertial sensor requiring no external GPS or speed log inputs. However, if you require horizontal surge and sway velocity compensation during sustained vessel turns, external speed log or NMEA VTG GGA aiding can be fed into the auxiliary RX port.
How do I configure the heave filter period on a Kongsberg MRU 2?
Connect the MRU 2 to a Windows PC via RS232 or an RS422 to USB converter and launch the Kongsberg MRC Plus MRU Configuration software. Under the Heave Filter tab, adjust the cutoff period typically set between 12 s and 20 s depending on local ocean swell periods and save the configuration to non volatile flash memory.
14 DAYS RETURN POLICY
RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.
NOTE:
IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.
FEEDBACK
WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWINGÂ TRUSTÂ INÂ US.
100% Genuine Products
-> YOU WILL GET WHAT YOU SEE IN PHOTOS
-> UNDERSTAND THE PRODUCT BEFORE BUYING
PACKAGING
QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.
SHIPPING
FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.
TAXES & IMPORT DUTIES
DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.

