Alfa Laval WT-200 Water Transducer 31830-17703
Condition: New
Country of Origin: Sweden
- 100% SECURED PAYMENTS
- AVAILABLE IN STOCK - READY TO SHIP
- EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
- HASSLE FREE 14-DAY RETURNS
Alfa Laval WT-200 Water Transducer 31830-17703 (DN40 / DIN)
The Alfa Laval WT-200 Water Transducer (MPN: 31830-17703) is a capacitive dielectric moisture sensor installed directly in the clean oil outlet line of Alfa Laval ALCAP centrifugal separation systems. Engineered to detect both free and emulsified water in mineral oils, the unit continuously tracks shifts in fluid permittivity and feeds real-time capacitance data to the separator’s Electronic Program Controller (EPC).
Internally, the transducer acts as a coaxial cylindrical capacitor. An insulated stainless steel inner electrode sits concentrically inside a pressure-vessel steel outer housing, allowing full-bore processed oil flow between the two conductive walls. The EPC supplies low-voltage DC power to the housing-mounted oscillator box, which converts the DC input into a 1 MHz high-frequency AC excitation signal. Because water possesses a dielectric constant roughly 35 to 40 times higher than mineral fuel or lubricating oil, trace water break-through immediately alters the dielectric medium between the electrode and pipe wall. The oscillator detects this capacitance shift and transmits the signal back to the EPC, which initiates either water drain valve opening or full bowl sludge discharge before contaminated oil reaches main engine fuel rails or sump tanks.
Model Details
- Manufacturer: Alfa Laval Marine & Power AB (Sweden)
- Model Series: WT-200 (Blue Housing Variant / Upgraded ALCAP Series)
- Primary Manufacturer Part Number (MPN): 31830-17703
- Formatted Part Number Variants: 31830-1770-3 / 3183017703
- Manual & Drawing References: Component Manual 1818051-02 / 1818002-02 | Dimensional Drawing Ref. 1761263 Rev. 3 / 1764185 Rev. 3
Technical Specifications: Alfa Laval WT-200 Water Transducer (31830-17703)
| Parameter | Specification |
|---|---|
| Manufacturer | Alfa Laval Marine & Power AB (Sweden) |
| Model | WT-200 (Blue Housing / ALCAP Series) |
| Manufacturer Part Number (MPN) | 31830-17703 (Alt: 31830-1770-3, 3183017703) |
| Sensing Principle | Coaxial Capacitive Dielectric Constant Measurement |
| Oscillator Frequency | 1 MHz |
| Power Supply & Interface | Low-Voltage DC Supply from EPC Controller (EPC-400 / EPC-41 / EPC-50) |
| Diagnostic Air Baseline Value | 120 – 130 (Displayed on EPC-400 / EPC-50 in Dry Air) |
| Process Media | Mineral Oils (HFO, MDO, MGO, Lubricating Oil) |
| Pipe Size & Flange Standard | DN 40 / DIN 2633 |
| Flange Dimensions | OD: 150 mm | Bolt Circle (PCD): 110 mm | Bolt Holes: 4 × Ø 18 mm |
| Max. Working Pressure | 600 kPa (6.0 bar / 87 psi) |
| Max. Hydrostatic Test Pressure | 1000 kPa (10.0 bar / 145 psi) |
| Max. Process Media Temperature | 110°C (230°F) |
| Max. Ambient Temperature | 70°C (158°F) |
| Enclosure Protection Rating | IP65 |
| Wetted Materials | Outer Housing: Pressure Vessel Steel | Inner Electrode: Stainless Steel |
| Connection Box Material | Cast Aluminium (Blue Protective Finish) |
| Cable Gland Entry | Pr 22.5 / Pg 16 for Cable Ø 12.5 – 15.0 mm |
| Oscillator Spare Part Kit | 1765216-81 / 1765216-82 |
| Class Approvals | Applied for LR, DNV, GL, BV |
| Net Weight | 7.0 kg |
Features
- 1 MHz High-Frequency Capacitive Sensing: Measures subtle shifts in fluid dielectric constant across the full cross-section of the clean oil outlet, detecting both free water slugs and tightly bound water-in-oil emulsions.
- Full-Bore Concentric Electrode Design: Pressure-vessel steel outer housing paired with a corrosion-resistant stainless steel inner electrode prevents flow restriction and withstands continuous thermal cycling up to 110°C.
- Modular Field-Serviceable Oscillator: Houses the oscillator and test circuit board inside an IP65 cast-aluminum enclosure (1765216-81 spare kit), allowing electronics replacement via a single center screw without breaking process piping.
- Direct EPC Closed-Loop Integration: Interfaces directly with Alfa Laval EPC-400, EPC-41, and EPC-50 controllers to trigger automatic water draining or sludge ejection and generate immediate Transducer Fault or high-water alarms (e.g., EPC-400 alarm A7-12).
- Marine Classification Society Compliance: Engineered to meet marine engine room vibration, ambient temperature (70°C max), and pressure (6 bar working / 10 bar hydrostatic test) standards under LR, DNV, GL, and BV rules.
Electrical Ratings & Terminal Allocations
- Input Power Supply: Low-voltage DC excitation supplied directly from the EPC controller transducer interface board (24 V DC nominal control loop / regulated DC oscillator feed).
- Excitation / Sensing Frequency: 1 MHz high-frequency AC applied across the coaxial capacitor plates.
- Output Signal & Calibration Baseline: Continuous capacitance-dependent analog/frequency feedback signal interpreted by the EPC microprocessor. On EPC-400 and EPC-50 diagnostic displays, a healthy WT-200 transducer registers a raw baseline value of 120 to 130 in clean dry air.
- Terminal Allocations & Wiring: Inside the IP65 aluminum connection box, a multi-pin screw terminal block connects the shielded multi-core instrumentation cable from the EPC cabinet to the oscillator/test PCB assembly (DC Supply +, 0V / GND, Signal Feedback, and Cable Shield / Chassis Earth). Note: Verify exact pin numbering (1–4 / X1) against the terminal strip silkscreen inside the junction box cover prior to energizing, as early and upgraded oscillator revisions (1765216-81 vs. 1765216-82) differ in PCB layout.
- Cable Entry Gland: Pr 22.5 / Pg 16 (and Pg 13.5 adapter) rated for shielded marine instrumentation cable outer diameters of 12.5 mm to 15.0 mm.
Compatible Alfa Laval Control Units
- Alfa Laval EPC-400 (ALCAP PLC Control Unit — Part Ref. 31830-5090-02)
- Alfa Laval EPC-41 (Separator Control Unit)
- Alfa Laval EPC-50 (Modular Separator Controller — EPC-50V / EPC-50 OP)
- Alfa Laval EPC-30 (Legacy ALCAP control panels equipped with compatible transducer input boards)
Compatible Alfa Laval Centrifugal Separators
- FOPX Series (Fuel Oil ALCAP Purifiers): FOPX 605, FOPX 607, FOPX 609, FOPX 610, FOPX 611, FOPX 613, FOPX 614
- LOPX Series (Lubricating Oil ALCAP Purifiers): LOPX 705, LOPX 707, LOPX 709, LOPX 710, LOPX 713, LOPX 714
- MOPX / WHPX / MFPX Series: High-speed marine and power-plant disc-stack separators retrofitted or configured with ALCAP water-transducer monitoring loops (including MFPX 307, MOPX 205–309)
Applications
- Main & Auxiliary Engine Heavy Fuel Oil (HFO) Treatment: Continuous water-breakthrough protection on ALCAP purifier modules processing high-viscosity residual fuels up to 700 cSt at 50°C.
- Marine Diesel & Gas Oil (MDO/MGO) Purification: Prevents free water entrainment into high-pressure common-rail fuel injection pumps and injectors.
- Trunk-Piston & Crosshead Engine Lube Oil Purification: Safeguards main propulsion and auxiliary generator crankcases against cylinder liner jacket-water leaks and condensation buildup.
- Land-Based Diesel Power Plants & Cogeneration: Automated moisture monitoring in stationary fuel conditioning and lube oil bypass centrifuge skids.
- Tanker Cargo & Slop Oil Reclamation: Verifies dewatered oil quality at the separator discharge manifold during slop oil recovery operations.
Frequently Asked Questions
What is the difference between Alfa Laval WT-200 part numbers 31830-17703 and 31830-17704?
Part number 31830-17703 (typically finished in blue) is manufactured with DN40 DIN 2633 flanges featuring a 150 mm outer diameter and 110 mm bolt circle. Part number 31830-17704 (typically finished in grey) is manufactured with DN40 JIS B2213 flanges featuring a 140 mm outer diameter. Both models use the exact same 1 MHz oscillator electronics and pressure/temperature ratings, so only the flange bolt pattern differs.
How do I test if an Alfa Laval WT-200 water transducer is faulty?
Remove the transducer from the clean oil discharge line, clean and thoroughly dry the inner stainless steel electrode and outer housing bore, and leave it connected to the EPC-400 or EPC-50 control unit. Check the live transducer value on the EPC display: a serviceable WT-200 will read between 120 and 130 in clean dry air. If the reading falls outside 120–130 or triggers a persistent Transducer Fault alarm after cleaning, the internal oscillator unit (1765216-81) requires replacement.
Can I replace just the oscillator inside the WT-200 without removing the pipe housing?
Yes. The oscillator unit and test circuit board are mounted inside the top IP65 aluminum junction box and secured by a single center screw. After isolating power at the EPC control panel and disconnecting the terminal wires, you can lift out the faulty oscillator and install spare kit 1765216-81 without unbolting the DN40 process flanges from the separator piping.
Which Alfa Laval separator control panels work with the WT-200 31830-17703?
The WT-200 31830-17703 is directly compatible with Alfa Laval EPC-400, EPC-41, and EPC-50 control units used on FOPX, LOPX, MOPX, WHPX, and MFPX centrifugal separator systems.
Why must the WT-200 be installed vertically with upward flow?
The WT-200 relies on the oil completely filling the annular space between its concentric inner electrode and outer pipe wall to measure dielectric capacitance accurately. Installing it vertically in an upward-flow leg ahead of an upward pipe bend prevents air or gas pockets from trapping inside the sensor chamber, which would otherwise distort capacitance readings and cause false alarms.
14 DAYS RETURN POLICY
RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.
NOTE:
IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.
FEEDBACK
WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWINGÂ TRUSTÂ INÂ US.
100% Genuine Products
-> YOU WILL GET WHAT YOU SEE IN PHOTOS
-> UNDERSTAND THE PRODUCT BEFORE BUYING
PACKAGING
QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.
SHIPPING
FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.
TAXES & IMPORT DUTIES
DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.

