AZBIL NRV-306K10 TACO Air Filter Regulator

AZBIL NRV-306K10 TACO Air Filter Regulator

The AZBIL NRV-306K10 is a high-performance integrated air filter regulator that is part of the famous TACO series. It does two important things in one small device: it accurately lowers the supply air to a steady fixed point and removes solid particles and moisture. This unit is built to handle the tough conditions of industrial and maritime use, so your pneumatic systems and control valves will always work the same way and wear down as little as possible.

Technical Specifications

Applications

• Pneumatic Control Loops: Give I/P converters and valve positioners clean signal air.
• Marine Engine Control: Controlling the air supply for pneumatic starting systems and bridge control maneuvering.
• Factory Automation: Using air cylinders and pick-and-place robots in places where dry, oil-free air is required.
• Instrumentation cabinets keep delicate sensors and transducers safe from trash in pipelines.

Maintenance Guide By NDMarineTech Engineer:

1) Daily Condensate Blowdown: Even if your system has an auto-drain, you should still open the drain valve by hand at the start of each watch or shift to make sure the bowl isnt water-logged, which might let moisture into the system.

2) Filter Element Integrity: Every 6 to 12 months, change the 5-micron element. If you see a big reduction in pressure across the regulator while the flow is high, its probably because fine scale or oil is getting stuck in the element.

3) Check the diaphragm: If the regulator bleeds air all the time from the relief port, it means that the diaphragm is broken or the seat is dirty. Have a TACO NRV repair kit on hand so you can fix it in 10 minutes.

4) Cleaning the Bowl: Use only neutral detergents to clean the polycarbonate bowl. Dont use chemical solvents like acetone or thinners because they can make the bowl crack and break under pressure.