Hamworthy V150 Compressor Cooler
Condition: New
Country of Origin: India
- 100% SECURED PAYMENTS
- AVAILABLE IN STOCK - READY TO SHIP
- EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
- HASSLE FREE 14-DAY RETURNS
Hamworthy V150 Compressor Cooler (Intercooler & Aftercooler Tubenest Assembly)
The Hamworthy V150 Compressor Cooler is an integral, fresh-water-cooled tubular heat exchanger engineered specifically for Hamworthy / Hatlapa V-Line two-stage, single-acting 90° V-configuration reciprocating marine starting air compressors. Mounted directly within the compressor’s cast water jacket housing, this finned copper-tube assembly manages thermal loads across both compression stages—functioning simultaneously as an interstage cooler (intercooler) between the 1st and 2nd stages and a final stage aftercooler prior to the centrifugal condensate separators.
By reducing compressed air discharge temperatures prior to downstream moisture separation and air receiver entry, the cooler prevents cylinder overheating, protects concentric valves from thermal distortion, and maintains volumetric efficiency during continuous 30 bar starting air duty.
Model Details
- Parent Equipment: Hamworthy / Hatlapa V-Line Water-Cooled Reciprocating Air Compressor
- Primary Model Fitment: Hamworthy V150 (30 Bar Rating)
- Sub-Assembly Name: Cooler Tubenest & Header Assembly (Interstage / Aftercooler Bundle)
- OEM Reference / Manual Code: PCH 1540 (Electro-Mechanical & Electronic Control Series)
- Manufacturer Part Number (MPN): V150-COOLER-ASSY / OEM Drawing Ref: 07.2390-0.SHT4 (Exact stamped serial/drawing revision must be verified against compressor nameplate prior to dispatch)
Compatibility
- Direct Compatibility:
- Hamworthy KSE: V150 Water-Cooled Starting Air Compressor (1000 / 1200 / 1500 / 1800 RPM variants, 50 Hz & 60 Hz)
- Hatlapa (Uetersener Maschinenfabrik): V150 V-Line Water-Cooled Compressor (Series PCH 1540 / Supplement 1540A)
- MacGregor: Hatlapa V150 Marine Piston Compressor
- Important Cross-Reference Note: While the V-Line series spans models V105, V150, V200, V250, and V375, the V150 utilizes its own dedicated Cooler Header (Manual Fig. 3.4) and tubenest pitch, distinct from the larger V200/V250/V375 cooler header assembly (Manual Fig. 3.5). Do not interchange V150 cooler bundles with V200+ housings. Always cross-check the compressor serial number and machine nameplate against illustrated spares drawing 07.2390-0.SHT4.
Hamworthy V150 Compressor Cooler — Technical Specifications
| Specification Parameter | Technical Value / Rating |
|---|---|
| Brand / OEM | Hamworthy KSE / Hatlapa / MacGregor |
| Compatible Compressor Model | Hamworthy V150 (V-Line 2-Stage, 90° V-Configuration) |
| Part Description | Integral Interstage & Aftercooler Tubenest Assembly |
| OEM Manual / Drawing Reference | PCH 1540 / Drawing 07.2390-0.SHT4 (Fig. 3.4 & Fig. 5.2) |
| Compressor Rated Capacity (FAD) | 150 m³/hr at 1800 RPM |
| Operating Discharge Pressure | 29.4 – 30.0 bar g (435 psi) |
| Cooling Medium | Fresh Water (Jacket / Central LT Cooling System) |
| Maximum Cooling Water Pressure | 7.0 bar g |
| Cooling Water Connection Size | G ¾” (19 mm Minimum Pipe Bore) |
| Core Construction | 4-Coil Seamless Copper Tubes with Rectangular Copper Fins |
| Sealing Specification | BS.4518 O-Rings & Asbestos-Free Marine Gaskets |
| Header Fastener Torque | 70 Nm (M12) / 170 Nm (M16) |
| Maximum Air Inlet Temperature | 45°C |
Features
- Dual-Stage Integrated Heat Exchange: Combines both interstage and final-stage cooling into a single compact finned-tube bundle housed inside the compressor’s cast water jacket, eliminating external intercooler piping leaks.
- High-Density Finned Copper Geometry: Four-coil rectangular-finned copper tube construction maximizes surface area to rapidly drop 2nd-stage discharge air temperatures before the centrifugal separator.
- 7 Bar Fresh Water Jacket Rating: Engineered to withstand central engine-room fresh water cooling pressures up to 7 bar g without tube-sheet deformation.
- Drop-In Serviceability: Designed for axial withdrawal via the cooler box end cover without dismantling the 1st or 2nd stage cylinder heads or crankcase drive train.
- Asbestos-Free Marine Sealing: Uses precision O-ring grooves and non-asbestos marine-grade jointing gaskets to prevent cross-contamination between high-pressure compressed air and jacket cooling water.
Our Engineer’s Guide:
- Monitor Your Separator Drain Intervals: The V150’s solenoid drain valves normally cycle every 5 minutes for 2 seconds. In tropical waters (high humidity/seawater temperatures above 30°C), shorten the drain interval to 2–3 minutes and increase duration to 3–4 seconds. Excess moisture carryover accelerates copper tube pitting and downstream valve corrosion.
- Check Cooling Water Sight Glass & Delta-T: Always verify flow through the cooling water outlet sight glass upon start-up. A sudden spike in final air delivery temperature (triggering the dual-pole high air temperature pre-alarm) usually points to either fouled water-side scale or a stuck cooling water solenoid shut-off valve.
- Use Correct Crankcase Oil: Carbon fouling on the air-side copper fins is almost always caused by overfilling the splash-lubricated crankcase or using non-approved mineral oils instead of OEM-specified synthetic compressor lubricants (Ref. 178492).
Frequently Asked Questions
What does the Hamworthy V150 compressor cooler do?
The Hamworthy V150 compressor cooler is a combined intercooler and aftercooler housed directly inside the compressor’s fresh-water cooling jacket. It removes heat from the compressed air between the 1st and 2nd compression stages and cools the final 30 bar discharge air before it enters the centrifugal moisture separators and main starting air receivers.
Is the Hamworthy V150 cooler interchangeable with the V200, V250, or V375 models?
No. Although they belong to the same Hamworthy / Hatlapa V-Line water-cooled series, the V150 uses a specific cooler header and tubenest assembly that differs in dimensions and capacity from the V200, V250, and V375 models. Always verify your compressor nameplate and serial number before ordering.
What are the symptoms of a failing Hamworthy V150 cooler tubenest?
Common signs include high final air discharge temperature alarms or shutdowns, milky emulsified oil in the crankcase (if water leaks into the air side and drains back), excessive water carryover into the starting air receivers, or air bubbles appearing in the cooling water outlet sight glass due to internal copper tube failure.
Can a leaking tube in the Hamworthy V150 cooler be plugged or repaired?
No. Manufacturer maintenance guidelines strictly advise against plugging or repairing damaged tubes in the V150 cooler bundle. Because the unit operates at pressures up to 30 bar and relies on balanced heat transfer across all coils, a compromised tubenest must be replaced as a complete assembly.
What is the maximum cooling water pressure for the Hamworthy V150 cooler?
The fresh water cooling jacket and cooler assembly are rated for a maximum cooling water working pressure of 7.0 bar g, using G ¾” connections with a minimum recommended pipe bore of 19 mm.
14 DAYS RETURN POLICY
RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.
NOTE:
IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.
FEEDBACK
WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWINGÂ TRUSTÂ INÂ US.
100% Genuine Products
-> YOU WILL GET WHAT YOU SEE IN PHOTOS
-> UNDERSTAND THE PRODUCT BEFORE BUYING
PACKAGING
QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.
SHIPPING
FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.
TAXES & IMPORT DUTIES
DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.

