Hamworthy V150 HP Block
Condition: Used
Country of Origin: India
- 100% SECURED PAYMENTS
- AVAILABLE IN STOCK - READY TO SHIP
- EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
- HASSLE FREE 14-DAY RETURNS
Hamworthy V150 HP Block – High-Pressure (2nd Stage) Cylinder Block
The Hamworthy V150 HP Block (High-Pressure / Final Stage Cylinder Block) is a water-jacketed pressure casting engineered for the two-stage, reciprocating Hamworthy V150 V-Line water-cooled marine starting air compressor. Mounted at the V-bank angle opposite the Low-Pressure (1st stage) cylinder on the common crankcase, this HP cylinder block houses the final-stage piston and concentric suction/delivery valve assembly. It compresses intercooled air from the first stage up to a nominal working discharge pressure of 30 bar (maximum working pressure 33 bar) for main diesel engine starting air receivers and shipboard service air systems.
Model Details
- Component Designation: High-Pressure (HP) / Final Stage Cylinder Block
- OEM Make: Hamworthy
- Parent Compressor Model: Hamworthy V150 (V-Line Water-Cooled Series)
- Manual / Publication Reference: PCH 1540 (Figure 5.5 – Final Stage Cylinder and Piston)
- Manufacturer Part Number (MPN): V150-HP-BLOCK
Hamworthy V150 HP Cylinder Block Technical Specifications
| Technical Parameter | Specification Details |
|---|---|
| Component Name | High-Pressure (HP) / Final Stage Cylinder Block |
| Manufacturer / Brand | Hamworthy / HATLAPA Hamworthy Marine Compressors |
| Compatible Compressor Model | Hamworthy V150 (V-Line Water-Cooled Series) |
| Manual Reference | Publication PCH 1540 (Section 5, Figure 5.5) |
| Compression Stage | 2nd Stage (Final High-Pressure Stage) |
| Nominal Working Pressure | 30 bar (435 psi) |
| Maximum Working Pressure | 33 bar (478.6 psi) |
| Operating Speed | 1,500 RPM (50 Hz) / 1,800 RPM (60 Hz) |
| Cooling System | Water-Cooled (Integral Cast Cooling Jacket) |
| Casting Material | Marine-Grade Close-Grained Grey Cast Iron |
| Valve Interface | Top-Mounted Final Stage Concentric Valve |
| Pre-Lubrication Port | Threaded Side-Wall Oil Priming Plug (20 ml Capacity) |
| Available Conditions | New / Class-Ready Reconditioned / Verified Surplus |
| Quality Testing | MPI Crack Detection, Hydrostatic Jacket Test, Bore Calibration |
Compatibility
- Compatible Compressor Models:
- Hamworthy V150 (Direct OEM fitment across standard 50 Hz and 60 Hz marine units)
- HATLAPA Hamworthy V150 (Post-merger equivalent V-Line frame)
- Note on V-Line Siblings: While the V105, V200, V250, and V375 share the V-Line architecture, bore diameters and crankcase deck stud patterns differ by capacity rating. Confirm bore diameter and serial number before cross-fitting between V105 and V150.
- Mating Sub-Assemblies & Mechanical Interfaces:
- Crankcase Base Flange: Aligns with the V150 crankcase HP mounting face via precision dowel pins and high-tensile studs.
- Top Valve Pocket: Accepts the V105/V150 Final Stage Concentric Valve assembly (Manual Ref: Figure 3.4 / Figure 3.3).
- Cooling Water Jacket Ports: Interfaces directly with the V150 Cooler Header and interstage/aftercooler water circuit.
- Side-Wall Service Port: Threaded plug port on the cylinder wall for pre-start 20 ml lubricating oil priming.
Part Number Cross-References
- Hamworthy Manual Publication Ref: PCH 1540 / Supplement 1540A
- Manual Drawing Reference: Section 5, Figure 5.5 (Final Stage Cylinder and Piston)
- Associated Component Cross-References:
- Final Stage Concentric Valve Assembly (V105/V150): Ref. Fig. 3.4 (PCH 1540)
- V150 Connecting Rod Assembly: Ref. Fig. 3.6 (PCH 1540)
- V150 Cooler Header: Ref. Fig. 3.4 / 3.7 (PCH 1540)
- Related OEM Part Number Prefix: 3140500xxx (HATLAPA Hamworthy V150 Series)
Features
- Integral Full-Length Water Cooling Jacket: Cast-in cooling passages surround the high-pressure compression zone to dissipate heat generated during 30-bar final compression, preventing lubricating oil carbonization and valve coking.
- Precision-Honed Cylinder Bore: Machined to tight concentricity and cross-hatch surface finish tolerances to ensure rapid piston ring seating, minimal blow-by, and low lube-oil carryover.
- Reinforced Concentric Valve Seat Housing: Heavy-section upper casting engineered to withstand continuous cyclic shock loads from the final-stage concentric suction/delivery valve at up to 1,800 RPM.
- Marine-Grade Close-Grained Cast Iron: High thermal conductivity and superior resistance to saltwater-side galvanic corrosion and thermal distortion during continuous duty cycles.
- Direct Bolt-On OEM Geometry: Exact flange thickness, stud hole pitch, and water transfer port alignment eliminate machining modifications during onboard overhauls.
Applications
- Main Propulsion Engine Starting Air Systems: Supplying 30-bar compressed air to main air receivers for two-stroke and four-stroke marine diesel engines.
- Auxiliary Diesel Generator Starting Systems: Charging auxiliary air bottles on ocean-going vessels.
- Shipboard Control & Service Air: Providing high-pressure air via pressure-reducing stations for pneumatic control systems, soot blowers, and deck machinery.
- Offshore Platforms & FPSOs: Continuous-duty air compression packages in corrosive marine environments.
- Power Plants & Heavy Industrial Stations: High-pressure reciprocating air compression installations.
Frequently Asked Questions
Is the Hamworthy V150 HP Block interchangeable with the V105, V200, or V250 models?
No. Although the V105, V150, V200, and V250 belong to the same Hamworthy V-Line water-cooled compressor family, each model uses different piston bore diameters and stroke/capacity configurations to achieve its rated free air delivery. Always match the HP block to the exact compressor model (V150) and verify the machine serial number on the crankcase nameplate.
What is the maximum working pressure rating of the Hamworthy V150 HP Cylinder Block?
The Hamworthy V150 HP block is engineered for a nominal air receiver charging pressure of 30 bar, with a maximum allowable working pressure rating of 33 bar.
How do you test a reconditioned Hamworthy V150 HP block before shipping?
Every reconditioned HP block undergoes a four-stage workshop verification: Magnetic Particle Inspection (MPI) to detect surface or subsurface cracks, a hydrostatic pressure test of the water cooling jacket to ensure zero leaks into the cylinder bore, ultrasonic wall-thickness measurement, and three-point micrometer bore calibration to confirm roundness and taper are within OEM limits.
Does the HP block come complete with the concentric valve and piston assembly?
Standard supply includes the bare precision-honed HP cylinder block casting. However, we can supply it as a complete top-end overhaul assembly—including the final-stage concentric valve, HP piston, piston ring set, gudgeon pin, and asbestos-free gasket kit—upon request.
14 DAYS RETURN POLICY
RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.
NOTE:
IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.
FEEDBACK
WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWINGÂ TRUSTÂ INÂ US.
100% Genuine Products
-> YOU WILL GET WHAT YOU SEE IN PHOTOS
-> UNDERSTAND THE PRODUCT BEFORE BUYING
PACKAGING
QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.
SHIPPING
FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.
TAXES & IMPORT DUTIES
DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.

