Yuken A22-L-R-01-C-K-32 Variable Piston Pump

Condition: New

Country of Origin: Japan

Live Support
  • 100% SECURED PAYMENTS
  • AVAILABLE IN STOCK - READY TO SHIP
  • EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
  • HASSLE FREE 14-DAY RETURNS
NDMARINETECH PAYMENT OPTIONS
Description

Yuken A22-L-R-01-C-K-32 Variable Displacement Piston Pump

The Yuken A22-L-R-01-C-K-32 is a swash-plate type, variable displacement axial piston pump engineered for continuous-duty marine and heavy industrial hydraulic power units (HPUs). Built to Japanese Industrial Standards (JIS), this model delivers a geometric displacement of 22.2 cm³/rev and operates across a pressure compensator adjustment range of 1.2 to 16 MPa (170 to 2,320 PSI).

The unit maintains a volumetric efficiency exceeding 98% and an overall efficiency above 90% at 16 MPa and 1,800 r/min. Its sharp deadhead cut-off characteristics minimize input power draw and hydraulic fluid heat generation during standby pressure holding phases, reducing reservoir cooling requirements aboard vessels and machinery decks.

 

Model Details

  • Manufacturer Part Number (MPN): A22-L-R-01-C-K-32
  • Series (A22): “A” Series Variable Displacement Axial Piston Pump, 22.2 cm³/rev (1.355 cu. in./rev) frame size
  • Mounting Configuration (L): Foot Mounting (includes heavy-duty cast mounting bracket kit)
  • Shaft Rotation (R): Clockwise (Right-hand) rotation viewed from the shaft end
  • Control Type (01): Standard Pressure Compensator Control
  • Pressure Adjustment Range (C): 1.2 to 16 MPa (170 to 2,320 PSI)
  • Port Orientation (Omitted): Axial Ports (Rear-facing suction and discharge ports)
  • Shaft Extension (K): Parallel Keyed Shaft (JIS standard)
  • Design Number (32): Standard 32-series internal engineering revision

 

Technical Specifications: Yuken A22-L-R-01-C-K-32

Specification Parameter Technical Value
Manufacturer Yuken Kogyo Co., Ltd.
Manufacturer Part Number (MPN) A22-L-R-01-C-K-32
Pump Design Variable Displacement Axial Piston Pump (Swash-Plate Type)
Design Standard JIS (Japanese Industrial Standard)
Geometric Displacement 22.2 cm³/rev (1.355 cu. in./rev)
Minimum Adjustable Flow 6.0 cm³/rev (0.366 cu. in./rev)
Rated Operating Pressure 16 MPa (2,320 PSI / 160 bar)
Intermittent Peak Pressure 16 MPa (2,320 PSI / 160 bar)
Pressure Adjustment Range (Code C) 1.2 to 16 MPa (170 to 2,320 PSI)
Control Method (Code 01) Pressure Compensator Type
Shaft Speed Range 600 to 1,800 r/min (RPM)
Direction of Rotation (Code R) Clockwise (Viewed from Shaft End)
Shaft Extension (Code K) Parallel Keyed Shaft
Mounting Configuration (Code L) Foot-Mounted Bracket
Port Orientation & Standard Axial Rear Ports; SAE 4-Bolt Split Flange (Standard Pressure Series)
Volumetric Efficiency > 98% (at 16 MPa, 1,800 r/min)
Overall Efficiency > 90% (at 16 MPa, 1,800 r/min)
Recommended Fluid Viscosity 20 to 200 mm²/s (cSt)
Operating Fluid Temperature 0°C to 60°C (32°F to 140°F)
Net Mass 18.7 kg (41.2 lbs)
HS Tariff Code 8413.60.0040

 

Features

  1. High Volumetric & Mechanical Efficiency: Achieves over 98% volumetric efficiency and 90% overall efficiency at 16 MPa and 1,800 RPM, minimizing internal slipper and valve-plate leakage.
  2. Rapid Pressure-Compensated Cut-Off: Automatically strokes the swash plate to zero-delivery hold mode once system pressure reaches the set threshold (up to 16 MPa), eliminating wasted relief-valve heat.
  3. Low Acoustic & Vibration Profile: Rigid cast-iron housing and precision-balanced cylinder barrel assembly dampen pressure ripple across the 600–1,800 RPM operating band.
  4. Compact Foot-Mounted Footprint: Integrated cast foot bracket (L) simplifies direct bedplate alignment with IEC or NEMA standard electric motors via flexible jaw or gear couplings.
  5. Standardized SAE Split-Flange Ports: Axial rear ports conform to SAE 4-bolt split-flange geometry, allowing straightforward piping in tight marine engine room or HPU enclosures.

 

Compatibility

  • Prime Movers: Compatible with 4-pole (1,500 RPM at 50 Hz / 1,800 RPM at 60 Hz) and 6-pole (1,000 / 1,200 RPM) squirrel-cage induction marine motors rated between 5.5 kW and 7.5 kW (at full 22.2 cc/rev flow and 16 MPa pressure).
  • Fluid Compatibility: Standard nitrile (NBR) seals are rated for mineral-based anti-wear hydraulic fluids (ISO VG 32, VG 46, VG 68). (Note: Fire-resistant fluids such as water-glycol require special design code 3230 and reduced maximum speed of 1,200 RPM; phosphate esters require design code 3206 with FKM seals).
  • Single-Pump Duty Only: Per Yuken A-Series engineering limits, the A22 frame does not feature a through-drive shaft extension and cannot be coupled to outboard tandem pumps.

 

Applications

  • Marine Steering Gear & Rudder Actuators: Constant-pressure variable-flow supply for electro-hydraulic rotary vane and ram-type steering systems.
  • Deck Machinery & Mooring Winches: Low-heat standby holding for anchor windlasses, constant-tension mooring winches, and davit boat hoists.
  • Cargo Hatch Cover & Ramp Hydraulics: Reliable variable-volume actuation for Ro-Ro stern ramps, watertight bulkhead doors, and folding hatch covers.
  • Engine Room Auxiliary HPUs: Controllable-pitch propeller (CPP) pitch-control servo packs and main engine exhaust valve actuator supply units.
  • Industrial Machine Tools & Presses: Hydraulic clamping circuits, injection molding auxiliary units, and steel-mill lubrication/tensioning power packs.

 

Frequently Asked Questions

What is the maximum operating pressure of the Yuken A22-L-R-01-C-K-32 piston pump?

The Yuken A22-L-R-01-C-K-32 has a rated continuous and intermittent maximum operating pressure of 16 MPa (2,320 PSI / 160 bar). Its internal “C” pressure compensator spring allows deadhead cut-off pressure adjustment anywhere between 1.2 MPa (170 PSI) and 16 MPa (2,320 PSI).

Can the Yuken A22-L-R-01-C-K-32 be converted from foot mounting to flange mounting?

Yes. The “L” foot-mounted configuration consists of a standard flange-mounted pump body (A22-F-R-01-C-K-32) bolted to a detachable cast-iron foot bracket. Removing the two hex mounting bolts and bracket converts the unit directly into a standard flange-mounted pump.

Does the A22-L-R-01-C-K-32 support a tandem outboard pump?

No. While larger Yuken A-series frames (such as the A37, A56, and A70) support through-drive tandem configurations, the A16 and A22 frame sizes do not include a rear through-shaft and can only be installed as single pumps.

What is the difference between the A22-L-R-01-C-K-32 and the A22-L-R-01-C-S-K-32?

The only difference is the hydraulic port location. The A22-L-R-01-C-K-32 features axial ports facing out the rear end cover, whereas the -S- model features side ports positioned at 90 degrees on the side of the valve block. All internal displacement, pressure ratings, and mounting dimensions are identical.

What hydraulic oil viscosity is required for marine operation?

Yuken specifies a kinematic viscosity range of 20 to 200 mm²/s (cSt) during normal operation between 0°C and 60°C. For most marine engine room ambient temperatures (30°C to 50°C), an ISO VG 46 anti-wear mineral hydraulic oil maintains optimal film thickness across the piston slippers and cylinder barrel.

Shipping and Delivery

14 DAYS RETURN POLICY

RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.

NOTE:

IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.

FEEDBACK

WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWING TRUST IN US.

100% Genuine Products

-> YOU WILL GET WHAT YOU SEE IN PHOTOS

-> UNDERSTAND THE PRODUCT BEFORE BUYING

PACKAGING

QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.

SHIPPING

FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.

TAXES & IMPORT DUTIES

DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.