TMC 306100 Oil Separator Kit 3000H

TMC 306100 Oil Separator Kit 3000h – Genuine OEM

The TMC 306100 Oil Separator Kit is a genuine OEM maintenance package engineered specifically for marine screw compressor systems operating in high-vibration, high-ambient engine room environments. Designed to sustain a nominal operational lifespan of 3,000 running hours or 1 calendar year, this kit maintains optimal oil carryover control (<3 ppm residual oil content) to safeguard downstream control air valves, automation instrumentation, and starting air reservoirs.

Manufactured with high-efficiency coalescing micro-glass media, the 306100 cartridge manages the differential pressure across the air-oil receiver tank, ensuring maximum oil recapture and continuous return to the compressor lubrication circuit.

Model Details

• Manufacturer: TMC (Tamrotor Marine Compressors AS)
• Part Description: Air-Oil Separator Element & Gasket Service Kit
• Manufacturer Part Number (MPN): 306100
• HS / Tariff Code: 8421.39.90 / 8421.99.00

Technical Details

Key Features

1. Integrated Static Grounding System: Conductive grounding tabs and metal-to-metal continuity paths eliminate electrostatic discharge risks inside the pressurized separator vessel.
2. Hydrocarbon-Resistant Elastomeric Gaskets: Pre-formed, high-temperature FKM/NBR seal rings rated to 120°C prevent external flange leakage under continuous cyclic loading.
3. Corrosion-Resistant Reinforced Core: Perforated inner and outer steel support cages treated for high-salinity engine room operating atmospheres.
4. Complete Drop-In Service Package: Includes separator cartridge, dedicated sealing O-rings, and replacement scavenge pipe sealing interfaces for rapid turnaround during vessel port calls.

Applications

• Marine shipboard service air and deck working air systems
• Main engine control air and automated valve maneuvering networks
• Offshore platform and drillship utility screw compressor skids
• Nitrogen generation feed air units requiring low-oil feed purity

Compatibility

• TMC Series: Compatible with standard marine series units requiring 3,000-hour service kits (verify receiver vessel diameter and vessel drawing index before order confirmation).
• Cross-References & Equivalent Part Identifiers: 700250, NT7984, NT2061, NT1834, 506633, NT1679, NT1293.

Frequently Asked Questions

What happens if the 3000-hour service interval on the TMC 306100 is exceeded?

Postponing replacement increases the differential pressure across the coalescing media. This causes higher electrical load on the drive motor, excessive thermal degradation of the compressor lubricant, and potential structural rupture of the filter media, leading to sudden, heavy oil carryover throughout the ship’s compressed air lines.

Is it necessary to replace the scavenge line seals and vessel gaskets when changing the 306100 element?

Yes. Compressed air heat cycles cause elastomeric seals to harden and lose elasticity over 3,000 operating hours. Using fresh OEM gaskets ensures an airtight seal and guarantees the critical static grounding connection between the separator element and vessel ground.

Can the 306100 separator element be washed and reused?

No. Coalescing separator media is composed of deep-bed, resin-bonded micro-glass fibers that trap sub-micron oil droplets. Solvent cleaning destroys the fiber layout, compromises mechanical integrity, and voids manufacturer safety margins. Always install a new OEM element.