Alfa Laval MAB-103B Oil Separator 50/60Hz
Condition: Seller Refurbished
Comes With Manual and Accessories
- 100% SECURED PAYMENTS
- AVAILABLE IN STOCK - READY TO SHIP
- EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
- HASSLE FREE 14-DAY RETURNS
Alfa Laval MAB-103B Oil Separator 50/60Hz Complete Reconditioned Unit with Accessories
The Alfa Laval MAB-103B is a solids-retaining centrifugal disc-stack separator engineered for continuous purification and clarification of marine fuel oils, distillate, diesel oils, and lubricating oils. Designed to remove free water and solid contaminants down to micron-level tolerances, this unit operates in either three-phase Purifier mode (oil, water, and sludge separation) or two-phase Clarifier mode (oil and sludge separation).
Supplied as a complete, workshop-reconditioned assembly configured for 50 Hz or 60 Hz 3-phase power supply, the unit includes built-on positive displacement feed and discharge gear pumps, a complete set of gravity discs, an operating water assembly, special dismantling tools, and vibration-damping resilient mounts.
Model Details
- Primary Model Designation: Alfa Laval MAB 103B-24
- OEM Product Number / MPN: 881145-09-01 / 881145-09-02
- Standard Built-On Gear Pump MPN: 529209-82 (High Capacity) / 529209-83 (Low Capacity Option)
- Condition: Reconditioned
Technical Details
| Parameter | Technical Specification |
|---|---|
| Manufacturer & Model | Alfa Laval MAB 103B-24 (Product No. 881145-09-01 / 881145-09-02) |
| Separator Type | Solids-retaining high-speed disc-stack centrifuge (Purifier / Clarifier) |
| Maximum Hydraulic Capacity | 1,400 L/h (1.4 m³/h / 6.16 US GPM) |
| Throughput — Distillate Fuel (1.5–5.5 cSt @ 40°C) | 1,150 L/h (1.15 m³/h) |
| Throughput — Marine Diesel Oil (13 cSt @ 40°C) | 900 L/h (0.90 m³/h) |
| Throughput — Steam Turbine Lube Oil | 800 L/h (0.80 m³/h) |
| Throughput — R&O Crosshead Lube Oil | 400 – 500 L/h (0.40 – 0.50 m³/h) |
| Throughput — Detergent Crosshead Lube Oil | 300 – 400 L/h (0.30 – 0.40 m³/h) |
| Throughput — Trunk Piston Engine Lube Oil | 200 – 300 L/h (0.20 – 0.30 m³/h) |
| Max. Permissible Feed Density | 991 kg/m³ at 15°C (Mechanical safety limit: 1,100 kg/m³) |
| Max. Sediment Density | 5,000 kg/m³ |
| Sludge & Water Holding Space | 0.56 Liters (0.14 US Gallons) |
| Operating Feed Temperature | 0°C to +100°C (Minimum oil flash point: 60°C) |
| Ambient Engine Room Temperature | +5°C to +55°C |
| Electric Motor Rating (Input) | 0.75 kW (1.0 HP), 4-pole, 3-Phase, 50 Hz or 60 Hz, IP55, Class F Insulation |
| Voltage Configurations | 380–415V (50 Hz) / 440–480V (60 Hz); 220–240V Delta option |
| Power Consumption | Idling: 0.4 kW | Running at Max Capacity: 0.6 kW | Start-up Peak: 0.6 kW |
| Starting Method | Direct-On-Line (DOL) via centrifugal friction clutch (Max 5s in Star if Y/Δ) |
| Motor Shaft Speed | 1,500 RPM (50 Hz) | 1,800 RPM (60 Hz) |
| Gear Drive Ratio | 40:7 (50 Hz) | 43:9 (60 Hz) |
| Bowl Spindle Speed | 8,570 RPM (50 Hz) | 8,600 RPM (60 Hz) |
| Revolution Counter Shaft Speed | 71 – 75 RPM (50 Hz) | 85 – 90 RPM (60 Hz) |
| Run-Up & Stopping Time | Run-up: ~3 min | Stop with mechanical brake: 2–2.5 min | Free coast: ~6 min |
| Built-On Inlet Pump (MPN 529209-82) | 1,150 L/h (50 Hz) / 1,380 L/h (60 Hz); Max Suction Lift: 4 m wg; Max Delivery: 15 m wg |
| Built-On Outlet Pump (MPN 529209-82) | 1,270 L/h (50 Hz) / 1,520 L/h (60 Hz); Delivery Head: 15 – 25 m wg |
| Sump Lubricating Oil Capacity | 0.8 Liters (ISO VG 68 / SAE 30 mineral gear/turbine oil) |
| Acoustic & Vibration Limits | Sound Pressure: 64 dB(A) (ISO 3744) | Max Vibration: 9.0 mm/s RMS |
| Materials of Construction | Bowl Body, Hood, Discs & Gravity Discs: Stainless Steel | Frame: Cast Iron (Centriblue) | Collecting Cover: Silumin | Spindle & Lock Ring: High-Tensile Steel |
| Dimensions & Net Weight | Approx. 610 x 760 x 660 mm (24″ x 30″ x 26″) | Total Net Weight: ~101 kg (Frame 75 kg, Motor 13 kg, Bowl 13 kg) |
Features
- Dual Purifier & Clarifier Functionality: Easily converts between three-phase purification (removing both free water and solids) and two-phase clarification (removing fine particulate sludge from dry oils) by swapping the top disc and gravity disc/discharge collar.
- High-G Centrifugal Separation: Generates approximately 8,500 G at 8,570–8,600 RPM, stripping water droplets and abrasive catalytic fines/carbon particles down to 0.5–1.0 micron.
- Integrated Positive-Displacement Gear Pumps: Equipped with shaft-driven built-on inlet and outlet gear pumps (529209-82), eliminating the need for external feed boosters on suction lifts up to 4 meters.
- Frequency-Matched Gear Train: Supplied with dedicated worm wheel and spindle ratios (40:7 for 50 Hz or 43:9 for 60 Hz) and matched centrifugal friction clutch pads to prevent bowl overspeed.
- Complete Ready-to-Install Package: Includes full gravity disc set (various inner diameters for density calibration), pin spanners, bowl compression tool, sight glasses, and resilient anti-vibration mounts.
Compatibility
- Marine Auxiliary & Main Propulsion Engines: Yanmar (6EY, 6N18, 6N21 series), Daihatsu (DK-20, DL-20, DS-18), Caterpillar (3406, 3408, 3412, 3508, 3512, C18, C32), Cummins (KTA19, KTA38, QSK19), MAN B&W (L16/24, L21/31), Wärtsilä (L20), and Mitsubishi (S6R, S12R).
- Auxiliary Preheaters: Alfa Laval Heatpac EHS / EHM electric heaters and steam/thermal oil preheaters (6 kW to 12 kW rating).
- Upward/Sister Frame Replacements: Direct hydraulic footprint upgrade/interchange for Alfa Laval MAB 103B-14 (purifier-only configuration) and smaller capacity sister unit to the Alfa Laval MAB 104B-24 (1,950 L/h max hydraulic capacity).
Applications
- Marine Diesel Oil (MDO) & Gas Oil (MGO) Purification: Day-tank transfer and continuous recirculation cleaning for tugboats, offshore supply vessels (OSVs), fishing trawlers, coastal tankers, and workboats.
- Main & Auxiliary Engine Lube Oil Bypass Filtration: Continuous kidney-loop bypass cleaning of detergent and R&O crankcase oils in trunk-piston and crosshead diesel engines.
- Steam & Gas Turbine Lube Oil Conditioning: Removal of condensed moisture and oxidation sludge in power plant and marine turbine sumps.
- Hydraulic & Gear Oil Reclamation: Offline purification of industrial hydraulic fluids, quench oils, and gearbox lubricants in steel mills and manufacturing plants.
- Transformer & Biodiesel Processing: Dehydration and particulate polishing of insulating mineral oils and FAME biodiesel feedstocks.
Frequently Asked Questions
What is the difference between Purifier and Clarifier mode on the Alfa Laval MAB-103B?
In Purifier mode, the separator removes both water and solid particles simultaneously using a top disc with a neck and a calibrated gravity disc, discharging clean oil and separated water through two separate outlets. In Clarifier mode, the water outlet is sealed off using a top disc without a neck and a discharge collar, allowing the unit to remove fine solid sludge from dry oils containing negligible water.
Can one MAB-103B unit operate on both 50Hz and 60Hz power supplies?
While the 3-phase electric motor can be wired for 50Hz or 60Hz voltages, the internal mechanical drive components are frequency-specific. Running at 50Hz requires a 40:7 gear ratio (worm wheel 515799-02) and 50Hz friction blocks (527767-81), whereas 60Hz operation requires a 43:9 gear ratio (worm wheel 515799-04) and 60Hz friction blocks (527770-81) to maintain the safe ~8,600 RPM bowl speed.
How often does the MAB-103B bowl need to be cleaned manually?
Because the MAB-103B is a solids-retaining centrifuge with a 0.56-liter sludge space, cleaning intervals depend on fuel or lube oil contamination levels. On clean distillate (MGO), bowl cleaning is typically required every 24 to 72 operating hours; on dirty marine diesel oil or heavy sump lube oil, inspect and clean the bowl every 8 to 24 hours before sludge reaches the disc stack outer edge.
What type of lubricating oil should be used in the MAB-103B gear housing?
Fill the gear sump with 0.8 liters of high-grade mineral turbine or circulating gear oil rated at ISO VG 68 (equivalent to SAE 30). Check the sight glass level daily while stopped and change the sump oil after the first 250 hours of commissioning, followed by every 1,500 operating hours.
Why is oil coming out of the water outlet during operation?
Oil discharging from the water outlet indicates a broken water seal. Common causes include selecting a gravity disc with an inner diameter that is too large for the oil density/temperature, insufficient sealing water added before introducing oil, excessively high feed flow rate, or clogged water paring channels inside the bowl hood.
14 DAYS RETURN POLICY
RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.
NOTE:
IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.
FEEDBACK
WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWINGÂ TRUSTÂ INÂ US.
100% Genuine Products
-> YOU WILL GET WHAT YOU SEE IN PHOTOS
-> UNDERSTAND THE PRODUCT BEFORE BUYING
PACKAGING
QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.
SHIPPING
FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.
TAXES & IMPORT DUTIES
DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.

