GEA Westfalia WSD-6 Complete Bowl
Condition: New
Country of Origin: Germany
- 100% SECURED PAYMENTS
- AVAILABLE IN STOCK - READY TO SHIP
- EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
- HASSLE FREE 14-DAY RETURNS
GEA Westfalia WSD-6 Complete Bowl Assembly – Brand New (MPN: 2058-6600-090)
The GEA Westfalia WSD-6 Complete Bowl (MPN: 2058-6600-090) is a self-cleaning disc-stack rotating assembly engineered for high-speed centrifugal separation. Manufactured in Germany by GEA Westfalia Separator Group, this complete rotating unit is built to handle two-phase liquid separation (light and heavy phases) alongside simultaneous solids ejection under continuous marine and oilfield duty.
The WSD-6 bowl incorporates GEA’s “soft-stream” feed geometry to minimize shear forces at the inlet, preventing emulsification of water and fine particulates before the fluid enters the separating disc stack. Its internal hydraulic operating-water mechanism actuates an annular sliding piston for controlled partial or total sludge desludging at full rotational speed.
Model Details
- Manufacturer: GEA Westfalia Separator Group GmbH (Germany)
- Series / Model: WSD-6 (2058 Series Frame)
- Manufacturer Part Number (MPN): 2058-6600-090
- Assembly Type: Complete Self-Cleaning Disc-Stack Bowl (Factory Dynamically Balanced)
- Condition: Brand New (Unused OEM surplus)
Compatible Separator Models
- GEA Westfalia WSD-6 (Oily water, crude oil, and slop oil self-cleaning separators)
- GEA Westfalia OSD-6 Series variants (Verify lock-ring thread pitch, spindle taper, and Unitrol/SMS/WMS sensor configuration against your vessel’s nameplate serial number prior to installation)
Part Number Cross-References
- 2058-6600-090 – Complete Bowl Assembly (WSD-6 specification)
- 2058-6600-020 – Complete Bowl Assembly (2058-frame variant)
- 2058-6600-510 – Complete Bowl Assembly (OSD-6-0136-067 specification)
- 2058-6600-520 – Complete Bowl Assembly (OSD-6-0196-067 specification)
- 2058-6604-000 – Bowl Bottom Sub-Assembly
- 2058-6503-000 – Annular Sliding Piston
- 2058-6620-000 – Complete Distributor
- 2058-9902-040 / 2058-9902-110 – Major Bowl/Hood Seal & Spare Parts Kits
Features
- Factory Dynamic Balancing: Balanced as a single matched rotating unit (bowl bottom, sliding piston, disc stack, distributor, and bowl top) to eliminate radial spindle vibration at >8,000 RPM.
- Soft-Stream Inlet Geometry: Accelerates incoming fluid smoothly up to bowl rotational speed without shearing water droplets into tight, unbreakable emulsions.
- High-Speed Hydraulic Desludging: Precision-machined closing chamber and annular piston allow rapid partial or total solids discharge without stopping the separator.
- Dual-Phase Centripetal Discharge: Supports pressurized, foam-free discharge of both clarified oil/light phase and separated water/heavy phase via dedicated centripetal pump chambers.
- Corrosion- & Erosion-Resistant Metallurgy: Forged stainless steel components withstand abrasive catalytic fines, rust scale, and high-salinity bilge/slop water.
Technical Specifications: GEA Westfalia WSD-6 Complete Bowl (2058-6600-090)
| Specification Parameter | Technical Value / Rating |
|---|---|
| Manufacturer | GEA Westfalia Separator Group GmbH |
| Model / Frame Series | WSD-6 (2058 Series) |
| Manufacturer Part Number (MPN) | 2058-6600-090 |
| Component Description | Complete Self-Cleaning Disc-Stack Bowl Assembly |
| Condition | Brand New (Unused OEM) |
| Net Bowl Weight | 48 kg (105.82 lbs) |
| Operating Speed Rating | 8,000 – 8,200 RPM (Max) |
| Product Feed Pressure | 2.0 bar (29 psi) |
| Inlet Feed Design | GEA Soft-Stream Low-Shear Inlet |
| Desludging Mechanism | Hydraulic Annular Sliding Piston (Partial & Total Ejection) |
| Liquid Discharge System | Dual Centripetal Pumps (Light Phase & Heavy Phase) |
| Host Control Interface | 24 VDC Solenoid Valve Block (Operating & Displacement Water) |
| Primary Materials | High-Tensile Stainless Steel & Elastomer Seals |
| Country of Origin | Germany |
Frequently Asked Questions
Is the GEA Westfalia 2058-6600-090 bowl dynamically balanced from the factory?
Yes. Every complete GEA Westfalia WSD-6 bowl assembly (2058-6600-090) is precision-machined and dynamically balanced at the factory as an integrated unit. All major sub-components carry matching serial markings and must remain together to prevent high-speed spindle vibration.
Can part number 2058-6600-090 replace an OSD-6 complete bowl (such as 2058-6600-510 or 2058-6600-520)?
While both the WSD-6 and OSD-6 belong to the 2058-series frame family and share core geometry, internal configurations—such as regulating ring sizing, disc stack spacing, and Unitrol/SMS/WMS sensing liquid channels—vary by process application. Always cross-check your separator’s serial number and machine execution code (e.g., -0136-067 or -0196-067) before substituting variants.
Does this complete bowl include the internal disc stack and sliding piston?
Yes. As a complete bowl assembly (2058-6600-090), it includes the bowl bottom, annular sliding piston, distributor, complete separating disc stack, bowl top, and lock ring. External static components such as the frame hood, centripetal pump paring discs, and vertical drive spindle are separate assemblies.
What maintenance checks are required before installing a brand-new WSD-6 bowl?
Clean the vertical spindle taper thoroughly, verify the spindle neck bearing radial play, apply OEM-approved anti-seize paste to the lock-ring threads, and check the bowl height setting after seating the bowl onto the spindle. Always perform a dry/water test run to verify operating-water closing and ejection pressures before introducing oil.
What is the net weight and shipping method for the 2058-6600-090 bowl?
The net weight of the WSD-6 bowl is 48 kg (105.82 lbs). For international marine and oilfield delivery, it is packed in a reinforced, heat-treated export wooden crate suitable for global air freight or vessel agent port delivery.
14 DAYS RETURN POLICY
RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.
NOTE:
IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.
FEEDBACK
WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWINGÂ TRUSTÂ INÂ US.
100% Genuine Products
-> YOU WILL GET WHAT YOU SEE IN PHOTOS
-> UNDERSTAND THE PRODUCT BEFORE BUYING
PACKAGING
QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.
SHIPPING
FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.
TAXES & IMPORT DUTIES
DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.

