Mitsubishi GT2712-STWD GOT2000 12.1″ HMI Touch Screen 24V DC

The MITSUBISHI ELECTRIC GT2712-STWD is a 12.1-inch GOT2000 GT27 series HMI featuring an SVGA TFT color LCD screen, a 24 V DC power supply, a white bezel, and a lot of built-in connection ports for industrial automation.

GT2712-STWDBasic information:

• Series: GOT2000, GT27 model, and Graphic Operation Terminal (HMI). ​
• Model: GT2712-STWD (white frame, DC power). ​
• A common use is as an operator interface for PLCs and FA devices in industrial control panels. ​

Touch screen and display

• Type of display: TFT color LCD with 65536 colors. ​
• The screen is 12.1 inches and has an SVGA resolution. ​
• 800 by 600 pixels is the resolution. ​
• Display area (about): 246 × 184.5 mm. ​
• Touch: The GT27 series has an analog resistive touch panel that can handle multiple points (simultaneous pressing). ​

Hardware and speed

-> Power supply: 24 V DC, with a tolerance of +25% to −20% (GT27 standard). ​

-> Power usage: The GT27 12.1-inch DC models below use roughly 44 W at full load. ​

-> Internal user memory: GT27 models include several tens of MB of user memory (the actual amount for the GT2712-STWD stated on the Mitsubishi data sheet). ​

-> IP67F protection in the front when the panel is placed appropriately, and IP2X protection all around the panel. ​

Connections and interfaces

-> The GT2712-STWD includes a lot of built-in connection ports, so you don’t need a separate communication device for basic use. ​

-> Ethernet: 1 × 10/100 Mbps port for PLC/FA network and GOT operations. ​

Serial:

• 1 x RS-232 (D-sub 9-pin male). ​
• 1 × RS-422/485 (D-sub 9-pin female). ​

USB:

• A USB device, like a mini-B, is needed to connect to a computer or software. ​
• A USB host (Type-A) is used to connect devices such as a keyboard, mouse, and USB memory, among others. ​
• SD/SDHC card slot for logging, backing up and restoring, and moving projects. ​

​

Ratings for the environment

• Standard GT27 HMIs work well between 0 and 55 °C, and the GT2712-STWD follows this range. ​
• GOT2000 series has a wide range of storage temperatures and humidity levels that work for industrial panels. ​
• Vibration resistance: Meets the vibration tests set by JIS B 3502 and IEC 61131-2 in the 5–150 Hz range. ​
• Tested to IEC 60068-2-27 for shock resistance (around 15–40 G depending on the test setting). ​

Functional parts

-> Advanced HMI features include multi-touch and gesture control, better visuals, and simple screen creation with GT Works3 software. ​

-> Data logging and alarms: You can log data to internal memory, USB memory, or an SD card. The alarm will show up and you can handle historical data. ​

-> Connectivity: Works best with Mitsubishi PLCs (MELSEC series) and can also connect to a variety of third-party devices using standard protocols. ​

-> Maintenance: Lets you back up and restore PLC parameters and GOT projects, run diagnostics, and update firmware over USB or Ethernet.