Concurrent Technologies CP PSE/P23 Industrial Board 700 6096-11 Rev B

Concurrent Technologies CP PSE/P23 Industrial Computer Board (P/N 700 6096-11 Rev B)

The Concurrent Technologies CP PSE/P23 (Part Number 700 6096-11 Rev B) is a CompactPCI single-board computer (SBC) engineered for mission-critical embedded control, telemetry, and real-time data acquisition. Built on an Intel processor architecture, this plug-in processor blade serves as the primary host CPU within modular industrial automation racks, marine propulsion consoles, and defense-grade command cabinets.

Designed for continuous 24/7 operation under mechanical shock, vibration, and thermal stress, the 700 6096-11 Rev B assembly integrates high-density backplane signaling with dedicated front-panel and rear-transition I/O routing. Note that exact factory configuration parameters—such as installed CPU clock speed, onboard soldered ECC SDRAM capacity, and specific PMC (PCI Mezzanine Card) site population—are strictly governed by the dash-number build suffix (-11) and hardware revision (Rev B).

Model Details

• Manufacturer: Concurrent Technologies Plc
• Model Series: CP PSE/P23 (CompactPCI Processor Series)
• Manufacturer Part Number (MPN): 700 6096-11 Rev B (Alternate formatting: 7006096-11)
• Hardware Architecture: CompactPCI (PICMG 2.0) Embedded Single Board Computer
• Sub-Assembly Role: System Slot / Peripheral Slot Host Processor Module

Technical Specifications

Features

1. Deterministic CompactPCI Backplane Interface: Supports high-throughput parallel PCI bus signaling across standard PICMG 2.0 backplanes for low-latency I/O polling.
2. Intel Embedded Architecture: Delivers deterministic processing for real-time operating systems (RTOS) including VxWorks, QNX, Linux, and legacy Windows Embedded environments.
3. Modular Mezzanine Expansion: Equipped with onboard PMC (IEEE P1386.1) expansion capability to host specialized fieldbus, fiber-optic (FDDI), or MIL-STD-1553 communication interfaces.
4. High-Reliability Component Selection: Manufactured with industrial-grade passive components, conformal-ready PCB layouts, and locking ejector handles to resist high-G vibration in vessel engine rooms.
5. Comprehensive Watchdog & Hardware Monitoring: Features programmable hardware watchdog timers, onboard voltage rail supervision, and thermal sensor telemetry to trigger automated fail-safe resets during software lockups.

Compatible Equipment & Subsystems

• Chassis & Enclosures: Standard 3U or 6U 19-inch CompactPCI industrial rackmount chassis and ruggedized ATR (Air Transport Rack) enclosures conforming to IEEE 1101.10/1101.11.
• Backplanes: Passive PICMG 2.0 CompactPCI backplanes with 3.3V or 5V V(I/O) keying (verify keying pin color/position prior to slot insertion).
• Companion Mezzanine Modules: Concurrent Technologies PMC carrier and network modules (such as the COK137/1 FDDI-PMC P/N 7206139-00 and 720-6084-00 series).

Part Number Cross-References

• 700 6096-11 Rev B: Primary hardware build variant (Revision B).
• 7006096-11: Non-spaced catalog notation for the identical base assembly.
• 7006096-18: Sister build configuration within the CP PSE/P23 family (differs in factory-populated memory, processor speed, or rear I/O routing).
• CP PSE/30x (7006104-02): Next-generation / related Concurrent Technologies CompactPCI processor series used in similar industrial automation deployments.

Frequently Asked Questions

What is the difference between P/N 700 6096-11 Rev B and 7006096-18?

Both part numbers belong to the Concurrent Technologies CP PSE/P23 CompactPCI processor board family, where 700 6096 identifies the base PCB assembly. The two-digit dash suffix (-11 vs. -18) denotes specific factory build configurations such as installed CPU clock speed, soldered RAM capacity, flash storage, or rear I/O pin routing. Always match the exact dash number and revision when replacing a board in an existing PLC or marine automation system.

Can the CP PSE/P23 700 6096-11 Rev B be installed in both System and Peripheral slots?

Yes, CompactPCI processor boards in the CP PSE series are engineered to operate as the primary host controller in the designated System Slot (marked with a triangle icon on the chassis) or as an intelligent peripheral processor in a standard Peripheral Slot, provided the backplane arbitration and BIOS settings are configured accordingly.

How do I obtain the exact pinout manual and datasheet for P/N 700 6096-11 Rev B?

Because Concurrent Technologies manufactures build-to-order and defense/industrial COTS assemblies with varying dash configurations, full hardware reference manuals and J2 rear-transition pinout tables are distributed directly through Concurrent Technologies’ technical support portal upon providing the complete part number (700 6096-11 Rev B) and board serial number.

What preventative maintenance is required before installing a surplus or reconditioned CP PSE/P23 board?

Before installation, verify the onboard CMOS backup battery voltage is above 2.9V DC, inspect the 2mm Hard Metric female connectors for debris or pin deformation, confirm the V(I/O) keying matches your rack backplane, and document all BIOS settings from the original unit to replicate IRQ and boot device configurations.