SAM Electronics EMP 2200-M Engine Manoeuvring Panel
Condition: New
Country of Origin: Germany
- 100% SECURED PAYMENTS
- AVAILABLE IN STOCK - READY TO SHIP
- EXPRESS DELIVERY: WORLDWIDE DELIVERY BY FEDEX & DHL EXPRESS COURIER
- HASSLE FREE 14-DAY RETURNS
SAM Electronics EMP 2200-M Engine Manoeuvring System Control Panel (PN: 815.001.200 0)
The SAM Electronics EMP 2200-M (Part Number: 815.001.200 0) is a operator interface panel engineered for the EMS 2200 (Engine Manoeuvring System) architecture. Installed in Wheelhouse (Bridge) consoles, Engine Control Rooms (ECR), and local machinery control stations, this panel serves as the primary human-machine interface for main engine speed, pitch, clutch, and operational mode transfers.
Built on the Lyngso Marine / SAM Electronics 2200 series hardware platform, the EMP 2200-M combines a backlit monochrome LCD display with a tactile, oil- and moisture-resistant membrane keypad. Operators use the unit to execute control station transfers (Bridge, ECR, Local), monitor real-time engine RPM and telegraph commands, adjust panel illumination via integrated dimmers, and acknowledge propulsion system alarms.
Model Details
- Manufacturer / OEM: SAM Electronics GmbH / Lyngso Marine A/S
- System Series: EMS 2200 (Engine Manoeuvring System 2200)
- Model Designation: EMP 2200-M (Engine Manoeuvring Panel – Master/Operator Unit)
- Primary Part Number (MPN): 815.001.200 0
- Hardware Revision / Variant Suffixes: 815.001.200 01 / Rev. D
- Drawing Reference: DWG No. 815.000.420/01
Technical Specifications: SAM Electronics EMP 2200-M (PN: 815.001.200 0)
| Technical Parameter | Specification Details |
|---|---|
| Manufacturer | SAM Electronics GmbH / Lyngso Marine |
| Product Type | Engine Manoeuvring System Operator Control Panel (HMI) |
| Model Number | EMP 2200-M |
| Manufacturer Part Number (MPN) | 815.001.200 0 (Cross-Ref: 815.001.200 01 / 815001200) |
| Assembly Drawing Number | 815.000.420/01 |
| Operating Power Supply | +24V DC Nominal Marine Supply |
| On-Board Fuse Protection | F1: F1A (Power, IEC 127-2 Sh. 1) | F2: 0.5A/F (Relay) | F3: 0.5A/F (Fire Alarm) |
| Main Terminal Interface | X1: 24-Way Terminal Block (+24VDC, Dual RS485, Relay Output, Fire Alarm) |
| Auxiliary / Display Interface | X5: Screen & RS485 Interconnect Port |
| Communication Protocol | Dual RS485 Serial Bus (EMS 2200 / Lyngso Fieldbus) |
| Hardware Configuration | X2 Panel Address DIP Switch | X3 & X4 RS485 Termination Jumpers (ON/OFF) |
| Operator Interface | Backlit Monochrome LCD with Tactile Membrane Keypad (S1-S4, ESC, ENT, Dimmer, Alarm Ack) |
| Compatible Automation Systems | EMS 2200, EPS 2200, EGS 2200, BSM 2200, BXM 2200 |
| Condition | Brand New (OEM Surplus / Unused) |
Compatibility
- Propulsion & Governor Systems: SAM Electronics EMS 2200 (Engine Manoeuvring System), EPS 2200 (Engine Protection System), and EGS 2200 (Electronic Governor System).
- Control Modules & Cabinets: BSM 2200 Bus Station Modules, BXM 2200 I/O Modules, and PFM 2200 Power Failure Modules.
- Companion Operator Panels: EPP 2200-M (815.001.201.01 Engine Protection Panel), EGP 2200 (815.001.205/01 Electronic Governor Panel), and DAP 2200-BRG / ACC Alarm Panels.
- Main Engine Architectures: Widely deployed on two-stroke low-speed marine diesel engines (such as MAN B&W MC / ME-C series and Wärtsilä / Sulzer RT-flex) as well as medium-speed four-stroke CPP (Controllable Pitch Propeller) propulsion plants.
Part Number Cross-References
- 815.001.200 0 (Base OEM Revision)
- 815.001.200 01 / 815.001.200.01 / 815.001.200/01 (Standard Production Revision)
- 815001200 (Condensed ERP / Spare Parts Catalog Format)
- 815.000.420/01 (Assembly / Engineering Drawing Reference Number)
- EMP2200M / EMP-2200-M (Model String Identifier)
Features
- Dual Redundant RS485 Fieldbus Architecture: Features two independent RS485 serial channels with onboard X3/X4 termination jumpers, ensuring uninterrupted propulsion command communication between the Bridge, ECR, and main engine control cabinet.
- Dedicated On-Board Circuit Protection: Equipped with three replaceable IEC 127-2 micro-fuses (F1 1A for +24V DC power, F2 0.5A for relay outputs, and F3 0.5A for the fire alarm loop) to isolate external wiring faults without damaging the main processor board.
- High-Contrast Backlit LCD & Night Dimming: Integrated day/night backlight dimmer keys (+/-) allow wheelhouse officers to adjust screen and keypad illumination for zero-glare night navigation.
- Tactile Marine-Grade Membrane Keypad: Sealed front fascia resists salt spray, humidity, and engine room oil mist while providing dedicated soft keys (S1–S4), station transfer buttons, and audible alarm acknowledgment.
- Hardware DIP-Switch Station Addressing: Physical X2 DIP switch bank enables rapid drop-in replacement at sea without requiring proprietary flashing software to assign Bridge or ECR node IDs.
Applications
- Wheelhouse / Navigation Bridge Consoles: Primary remote engine manoeuvring and telegraph control station.
- Bridge Wing Control Pedestals: Slave/transferable manoeuvring panel for precision docking and harbor pilotage.
- Engine Control Room (ECR) Desks: Main machinery space propulsion monitoring, RPM setpoint control, and control-location transfer hub.
- Propulsion Retrofit & Drydock Overhauls: Direct drop-in replacement for degraded LCD displays or unresponsive membrane keypads on legacy SAM Electronics / Lyngso Marine 2200-series vessels.
Frequently Asked Questions
What is the difference between SAM Electronics PN 815.001.200 0 and 815.001.200 01?
Both part numbers refer to the EMP 2200-M Engine Manoeuvring System Panel built on hardware assembly drawing 815.000.420/01. The trailing 0 and 01 indicate minor factory revision suffixes; both units share identical mechanical cutout dimensions, +24V DC power inputs, X1 24-way terminal pinouts, and dual RS485 communication interfaces, making them directly interchangeable.
Does the EMP 2200-M require software programming before installation?
No. The EMP 2200-M operates as a dedicated bus operator terminal within the EMS 2200 network. Station role assignment (such as Wheelhouse Bridge, Bridge Wing, or Engine Control Room) and RS485 bus termination are configured directly via the hardware X2 DIP switch bank and X3/X4 jumpers on the rear circuit board.
Can this panel replace a Lyngso Marine EMP 2200 unit?
Yes. SAM Electronics and Lyngso Marine jointly developed and branded the 2200-series marine automation platform. A unit labeled Lyngso Marine EMP 2200 with part number 815.001.200/01 is electrically and mechanically identical to the SAM Electronics EMP 2200-M (815.001.200 0).
What happens if the X3 and X4 termination jumpers are set incorrectly?
The X3 and X4 jumpers control the 120-ohm termination resistors for the two independent RS485 communication channels. If termination is left OFF at the physical end of the bus—or turned ON at an intermediate node—signal reflections can cause intermittent communication alarms or delayed telegraph response between the Bridge and the main engine governor.
Which fuses are installed on the EMP 2200-M PCB?
The rear board houses three fast-acting micro-fuses: F1 (1A, IEC 127-2 Sh. 1) protecting the +24V DC main power input, F2 (0.5A/F) protecting the auxiliary relay output circuit, and F3 (0.5A/F) protecting the fire alarm loop interface.
14 DAYS RETURN POLICY
RETURNS ARE ACCEPTED IN 14 DAYS. BUYER PAYS THE SHIPPING CHARGES. RESTOCKING FEES 20%.
NOTE:
IF THE ITEM COMES UNDER CUSTOMS, THE BUYER WILL BE FULLY RESPONSIBLE FOR DUTIES AND OTHER CHARGES. WE, AS THE SELLER, DO NOT ACCEPT RETURNS OR REFUNDS IN THIS CASE. KINDLY CONNECT WITH US BEFORE PURCHASING AN ITEM OR IF YOU HAVE ANY OTHER QUERIES.
FEEDBACK
WE WILL BE WAITING FOR YOUR VALUABLE FEEDBACKS. THANK YOU FOR SHOWINGÂ TRUSTÂ INÂ US.
100% Genuine Products
-> YOU WILL GET WHAT YOU SEE IN PHOTOS
-> UNDERSTAND THE PRODUCT BEFORE BUYING
PACKAGING
QUALITY PACKING FOR EACH PRODUCT. ASSURED SAFE & UNDAMAGED DELIVERY.
SHIPPING
FeDEX, DHL EXPRESS INTERNATIONAL SHIPPING.
TAXES & IMPORT DUTIES
DESTINATION COUNTRY ALL TAXES & DUTY TO BE PAID BY BUYER (NOT INCLUDED IN PRICE.

